Transforming Robot Production Pipeline

1. Volume 4/12 - Modeling the arms in 3ds Max.flv206.02MB
2. Volume 6/03 - Rigging the robot's left leg.flv140.87MB
3. Volume 4/13 - Assembling the robot.flv136.26MB
4. Volume 6/48. Finalizing the pistons.flv136.13MB
5. Volume 6/21. Rigging the wheels connected to the robot's hip.flv130.79MB
6. Volume 6/18 - Rigging the wheels connected to the robot's legs.flv129.82MB
7. Volume 6/18. Rigging the wheels connected to the robot's legs.flv129.82MB
8. Volume 6/26. Setting up the wheels connected to the back.flv119.49MB
9. Volume 6/04 - Completing the left leg's base rig.flv106.8MB
10. Volume 2/3.Building the wheels.flv104.94MB
11. Volume 4/11 - Modeling the Legs.flv99.99MB
12. Volume 4/07 - Detailing the panels.flv98.19MB
13. Volume 5/05 - Adding decals from our truck textures.flv96.71MB
14. Volume 5/03 - Building a photographic texture base.flv93.78MB
15. Volume 1/8.Adding finishing touches to our concept.flv90.11MB
16. Volume 6/36. Rigging the robot's head.flv86.26MB
17. Volume 6/47. Starting to rig the arm pistons.flv85.95MB
18. Volume 6/43. Rigging the fingers.flv85.56MB
19. Volume 6/09 - Connecting the leg and hip meshs.flv85.46MB
20. Volume 4/15 - Creating a proxy and preparing for texture.flv85.12MB
21. Volume 3/647-8-h.flv84.71MB
22. Volume 1/7.Adding the robots other arm and refining details.flv84.37MB
23. Volume 1/5.Reversing the design and mirroring details.flv82.43MB
24. Volume 5/04 - Creating detail that doesn’t exist with textures .flv81.42MB
25. Volume 6/46. Wrapping up the hands.flv81.18MB
26. Volume 4/10- Complete the head in Maya.flv81.03MB
27. Volume 6/19. Finalizing the leg wheels.flv77.91MB
28. Volume 6/19 - Finalizing the leg wheels.flv77.91MB
29. Volume 4/14 - Creating a UV layout.flv77.59MB
30. Volume 6/25. Completing the chest rig.flv77.51MB
31. Volume 6/24. Chest control.flv77.28MB
32. Volume 2/10.Preparing the model for texturing.flv77.19MB
33. Volume 3/647-4-h.flv76.73MB
34. Volume 6/15. Toe bend controls.flv76.7MB
35. Volume 6/15 - Toe bend controls.flv76.7MB
36. Volume 2/7.Laying ou the UVs.flv76.51MB
37. Volume 4/03 - Building an armature.flv75.25MB
38. Volume 5/02 - Using selection groups and object versions.flv74.33MB
39. Volume 2/6.Adding details.flv72.71MB
40. Volume 5/06 - Creating the preliminary dirt pass.flv72.63MB
41. Volume 2/9.Creating a proxy.flv71.49MB
42. Volume 6/02 - Starting on the robot's rig.flv71.23MB
43. Volume 6/06 - Starting the foot roll rig.flv70.73MB
44. Volume 6/07 - Connecting the reverse foot rig.flv70.66MB
45. Volume 2/5.Adding edge detail.flv70.58MB
46. Volume 5/07 - Creating the high contrast dirt pass.flv70.35MB
47. Volume 2/4.Modeling the bed.flv69.67MB
48. Volume 6/49. Finishing the robot's rig.flv69.4MB
49. Volume 3/647-6-h.flv69.04MB
50. Volume 2/8.Cutting apart the truck.flv67.92MB
51. Volume 6/56. Wrapping up the tires.flv67.36MB
52. Volume 6/23. Dynamically parenting the hip wheels.flv65.35MB
53. Volume 5/08 - Scuffing up the robot's paint.flv65.27MB
54. Volume 6/10 - Primary leg controls.flv64.78MB
55. Volume 6/41. Constraining the arm groups and connect curves for the elbows.flv64.54MB
56. Volume 4/06 - Creating custom pieces in TopoGun.flv64.43MB
57. Volume 3/647-3-h.flv63.14MB
58. Volume 6/16 - Knee controls.flv62.25MB
59. Volume 6/16. Knee controls.flv62.25MB
60. Volume 1/6.Beginning to add color to our robot design.flv58.61MB
61. Volume 6/45. Creating finger controls.flv58.31MB
62. Volume 4/05 - Creating a body blank in ZBrush.flv57.63MB
63. Volume 6/27. Custom attributes for the back wheels and connecting the back rails.flv55.45MB
64. Volume 4/08-Creating the head shape.flv54.95MB
65. Volume 1/4.Pulling out detail using grayscale values.flv54.33MB
66. Volume 6/17. Cleaning up the leg rig.flv53.34MB
67. Volume 6/17 - Cleaning up the leg rig.flv53.34MB
68. Volume 5/09 - Adding rust to the robot.flv53.16MB
69. Volume 1/3.Roughing in details and narrowing down silhouettes.flv52.61MB
70. Volume 6/39. Setting up the elbows.flv52.48MB
71. Volume 6/38. Starting on the arms.flv52.18MB
72. Volume 6/29. Constraining the spine geometry.flv52.14MB
73. Volume 6/20. Creating a hip control.flv51.2MB
74. Volume 3/647-9-h.flv50.76MB
75. Volume 6/32. Setting up the robot's main neck plates.flv49.96MB
76. Volume 6/34. Rigging the neck with inverse kinematics.flv49.76MB
77. Volume 3/647-7-h.flv49.28MB
78. Volume 6/52. Automating the wheel rotation of the truck.flv48.79MB
79. Volume 4/09 - Creating head pieces in TopoGun.flv48.35MB
80. Volume 1/2.Project details and getting started with silhouettes.flv46.83MB
81. Volume 6/57. Finalizing the transforming robot's rig.flv45.72MB
82. Volume 5/10 - Re-purposing channels to create specular data.flv45.44MB
83. Volume 6/05 - Creating a hip joint and mirroing the left leg.flv44.87MB
84. Volume 6/31. Rigging the neck's base plates.flv44.86MB
85. Volume 6/13. Wiring the foot roll's plusMinusAverage nodes.flv44.4MB
86. Volume 6/13 - Wiring the foot roll's plusMinusAverage nodes.flv44.4MB
87. Volume 6/54. Rigging the truck's body and controlling the front tires.flv43.7MB
88. Volume 6/12 - Starting on an animator-friendly foot roll rig.flv43.45MB
89. Volume 6/12. Starting on an animator-friendly foot roll rig.flv43.45MB
90. Volume 1/9.Final thoughts and handing off artwork.flv42.52MB
91. Volume 6/40. Adding arm controls.flv42.44MB
92. Volume 3/647-5-h.flv42.41MB
93. Volume 3/647-2-h.flv40.88MB
94. Volume 6/51. Rigging the truck's wheels.flv37.66MB
95. Volume 2/2.Planning the project.flv37.53MB
96. Volume 4/04 - Working cooperatively.flv36.68MB
97. Volume 6/08 - Extra joints for toe bend control.flv36.33MB
98. Volume 6/44. Connecting the fingers.flv36.33MB
99. Volume 6/14. Finishing the foot roll rig.flv36.27MB
100. Volume 6/14 - Finishing the foot roll rig.flv36.27MB
101. Volume 6/22. Constraining the wheel geometry connected to the robot's hip.flv35.47MB
102. Volume 6/30. Creating a center-of-gravity control.flv34.1MB
103. Volume 3/647-10-h.flv32.91MB
104. Volume 6/42. Dynamically parenting the arms.flv32.16MB
105. Volume 4/02 - Working with reference.flv31.29MB
106. Volume 6/11. Organizing the rig.flv30.54MB
107. Volume 6/50. Beginning the truck's rig.flv26.12MB
108. Volume 5/11 - Selectively modifying the specular channel data.flv26.11MB
109. Volume 6/55. A technique for simulating tire pressure.flv24.98MB
110. Volume 5/12 - Exporting maps and closing thoughts.flv23.68MB
111. Volume 6/28. Dynamically parenting the back wheels.flv23.64MB
112. Volume 6/37. Custom attribute for the neck's base plates.flv22.9MB
113. Volume 6/53. Finishing the wheel rotation expression.flv21.38MB
114. Volume 6/35. Optimizing the scene.flv20.36MB
115. Volume 6/33. Re-orienting the neck joints.flv15.94MB
116. Volume 2/1.Introduction and project overview.flv15.84MB
117. Volume 4/01 - Introduction and project overview.flv15.67MB
118. Volume 1/1.Introduction and project overview.flv12.16MB
119. Volume 5/01 - Introduction and Project Overview.flv10.35MB
120. Volume 3/647-1-h.flv9.31MB
121. Volume 6/01 - Introduction and project overview.flv8.83MB