首页
磁力链接怎么用
한국어
English
日本語
简体中文
繁體中文
[FreeTutorials.Us] Udemy - Engineering Simulations - Complete ANSYS 15.0 Course
文件类型
收录时间
最后活跃
资源热度
文件大小
文件数量
视频
2019-9-15 11:58
2024-12-20 16:40
255
18.69 GB
359
磁力链接
magnet:?xt=urn:btih:93db3946e7258b968678525c9c9629a720bf7275
迅雷链接
thunder://QUFtYWduZXQ6P3h0PXVybjpidGloOjkzZGIzOTQ2ZTcyNThiOTY4Njc4NTI1YzljOTYyOWE3MjBiZjcyNzVaWg==
二维码链接
种子下载(838888不存储任何种子文件)
种子下载线路1(迅雷)--推荐
种子下载线路2(比特彗星)
种子下载线路3(torcache)
3条线路均为国内外知名下载网站种子链接,内容跟本站无关!
相关链接
FreeTutorials
Us
Udemy
-
Engineering
Simulations
-
Complete
ANSYS
15
0
Course
文件列表
452736 - 001 - Introduction.mp4
38.55MB
452736 - 002 - Workflows.mp4
27.98MB
452736 - 003 - Cell States.mp4
31.93MB
452736 - 004 - Sharing Data.mp4
20.46MB
452736 - 005 - Files.mp4
30.14MB
452736 - 006 - Parameters and Summary.mp4
33.11MB
452736 - 007 - DM.mp4
64.74MB
452736 - 008 - Launching DM.mp4
44.5MB
452736 - 009 - User Interface.mp4
137.81MB
452736 - 010 - Selection Tools.mp4
41.86MB
452736 - 011 - View Controls.mp4
47.48MB
452736 - 012 - Edge Display Options.mp4
39.88MB
452736 - 013 - Mouse and Hotkeys.mp4
37.68MB
452736 - 014 - Workshop 1 Basics (T-Piece).mp4
61.93MB
452736 - 015 - Planes and Sketches.mp4
24.96MB
452736 - 016 - Working with Planes.mp4
38.28MB
452736 - 017 - Creating Sketches.mp4
44.45MB
452736 - 018 - Modifying Sketches.mp4
51.94MB
452736 - 019 - Dimensioning Sketches.mp4
34.1MB
452736 - 020 - Constraints and Settings.mp4
61.31MB
452736 - 021 - Tips, Copying and Projecting.mp4
44.11MB
452736 - 022 - Workshop 2 Sketching (Castor Wheel).mp4
55.83MB
452736 - 023 - Modeling.mp4
24.24MB
452736 - 024 - Body States, Active and Frozen.mp4
35.34MB
452736 - 025 - 3D Features Extrude.mp4
133.58MB
452736 - 026 - 3D Features Revolve and Sweep.mp4
28.96MB
452736 - 027 - Skins, Thin Surfaces and Blending.mp4
33.81MB
452736 - 028 - Using Patterns to Create Multiple Copies.mp4
15.7MB
452736 - 029 - Body and Boolean Operations.mp4
89.96MB
452736 - 030 - Slicing.mp4
34.03MB
452736 - 031 - Primitives.mp4
10.34MB
452736 - 032 - Creating 2D objects.mp4
25.92MB
452736 - 033 - Suppressing and Hiding Objects.mp4
31.15MB
452736 - 034 - Named Selections.mp4
49.44MB
452736 - 035 - Single and Multi-Body Parts.mp4
79.72MB
452736 - 036 - Workshop 3 Modeling (Exhaust).mp4
163.41MB
452736 - 037 - Geometry Simplification and Repair.mp4
85.51MB
452736 - 038 - Analysis and Repair Tools.mp4
172.42MB
452736 - 039 - Defeaturing with Face and Edge Delete.mp4
50.16MB
452736 - 040 - Face Split.mp4
20.77MB
452736 - 041 - Patching a surface.mp4
26.61MB
452736 - 042 - Projection and Sew.mp4
58.39MB
452736 - 043 - Fill, Enclosure and Symmetry.mp4
106.91MB
452736 - 044 - Connect, and Surface Extension.mp4
70.35MB
452736 - 045 - Geometry Types and Conversion.mp4
61.66MB
452736 - 046 - Workshop 4 Cleanup (Turbocharger).mp4
182.84MB
452736 - 047 - Geometry Properties.mp4
48.23MB
452736 - 048 - CAD Connections.mp4
150.03MB
452736 - 049 - GAMBIT Reader.mp4
14.09MB
452736 - 050 - Introduction and Types.mp4
52.22MB
452736 - 051 - Parameters from CAD.mp4
23.64MB
452736 - 052 - Creating Parameters in DM.mp4
26.38MB
452736 - 053 - Parameter Manager.mp4
39.14MB
452736 - 054 - Driven Parameters (writing functions).mp4
52.14MB
452736 - 055 - Auxiliary Variables and Functions.mp4
21.53MB
452736 - 056 - Workshop 5a Mixing Tank.mp4
152.95MB
452736 - 057 - Workshop 5b Automotive Aero.mp4
278.01MB
452736 - 058 - Workshop 5c Conical Combustion Chamber.mp4
106.82MB
452736 - 059 - Workshop 5d Bracket.mp4
199.5MB
452736 - 060 - Workshop 5e Pulley.mp4
106.6MB
452736 - 061 - Beams and Shells.mp4
26.3MB
452736 - 062 - Line Bodies.mp4
48.23MB
452736 - 063 - Cross Sections.mp4
45.62MB
452736 - 064 - Cross Section Alignment and Offset.mp4
122.42MB
452736 - 065 - Surfaces from Edges and Sketches.mp4
50.24MB
452736 - 066 - Creating Mid Surfaces.mp4
67.66MB
452736 - 067 - Modifying Mid Surfaces.mp4
43.05MB
452736 - 068 - Joints.mp4
35.7MB
452736 - 069 - Workshop 6 Beam and Shell Modeling.mp4
161.83MB
452736 - 070 - Lines and Bodies.mp4
22.63MB
452736 - 071 - Line Bodies.mp4
32.1MB
452736 - 072 - Cross Sections.mp4
16.79MB
452736 - 073 - Surfaces from Edges and Sketches.mp4
32.92MB
452736 - 074 - Mid-Surfaces.mp4
45.81MB
452736 - 075 - Joints.mp4
22.05MB
452736 - 076 - Introduction.mp4
103MB
452736 - 077 - Launching Meshing and GUI Basics.mp4
85.84MB
452736 - 078 - Graphics Controls.mp4
49.41MB
452736 - 079 - Multiple Parts and Bodies.mp4
42.44MB
452736 - 080 - Overview of Meshing Methods.mp4
80.21MB
452736 - 081 - Overview of Global Controls.mp4
21.65MB
452736 - 082 - Overview of Local Controls.mp4
22.05MB
452736 - 083 - Named Selections.mp4
55.85MB
452736 - 084 - Overview of Mesh Creation.mp4
20.33MB
452736 - 085 - Checking Mesh Quality.mp4
34.81MB
452736 - 086 - Parameterization of Meshing.mp4
14.28MB
452736 - 087 - Workshop 1 Meshing Basics (T-Piece).mp4
101.29MB
452736 - 088 - Meshing Methods.mp4
58.15MB
452736 - 089 - Tetrahedrons Methods.mp4
65.49MB
452736 - 090 - Settings to Control the Mesh.mp4
36.05MB
452736 - 091 - Hexahedral (Hex) Meshing Introduction.mp4
16.95MB
452736 - 092 - Sweep Tool for Hex Prism Meshing.mp4
82.55MB
452736 - 093 - Multizone Tool for Hex Prism Meshing.mp4
47.08MB
452736 - 094 - Automatic Method.mp4
10.13MB
452736 - 095 - 2D Meshing.mp4
38.37MB
452736 - 096 - Meshing Multiple Bodies.mp4
79.75MB
452736 - 097 - Workshop 2 Mesh Methods (Block and Pipe).mp4
178.87MB
452736 - 098 - Overview of Global Controls.mp4
25.38MB
452736 - 099 - Defaults and Relevance Setting.mp4
14.08MB
452736 - 100 - Sizing Settings.mp4
64.9MB
452736 - 101 - Inflation (Boundary Layer) Meshes.mp4
57.22MB
452736 - 102 - Advanced Inflation Options.mp4
34.06MB
452736 - 103 - Defeaturing.mp4
5.57MB
452736 - 104 - Mesh Quality and Statistics.mp4
10.33MB
452736 - 105 - Workshop 3 Global Controls (Landing Gear).mp4
120.78MB
452736 - 106 - Overview of Local Controls.mp4
29.46MB
452736 - 107 - Local Sizing Controls.mp4
23.86MB
452736 - 108 - Sphere and Body of Influence.mp4
28.65MB
452736 - 109 - Mapped Face Meshing.mp4
27.34MB
452736 - 110 - Matched Meshing (for Periodic Boundaries).mp4
25.13MB
452736 - 111 - Pinch Control.mp4
4.14MB
452736 - 112 - Inflation as a Local Control.mp4
15.3MB
452736 - 113 - Workshop 4 Local Controls (Valve body).mp4
122.2MB
452736 - 114 - Overview of Assembly Meshing.mp4
30.04MB
452736 - 115 - CutCell Assembly Meshing.mp4
18.63MB
452736 - 116 - Tetrahedral Assembly Meshing.mp4
9.92MB
452736 - 117 - Controls for Assembly Meshing.mp4
56.5MB
452736 - 118 - Virtual Bodies.mp4
24.47MB
452736 - 119 - Defining Fluid (Wetted) Surfaces.mp4
7.25MB
452736 - 120 - Sharp Angles and Leakage Paths.mp4
11.21MB
452736 - 121 - Overview of Mesh Quality.mp4
16.76MB
452736 - 122 - The Importance of Mesh Quality.mp4
78.04MB
452736 - 123 - Hex vs Tet meshing.mp4
18.04MB
452736 - 124 - Mesh Metrics Skewness and Orthogonal Quality.mp4
74.27MB
452736 - 125 - Mesh Metrics Aspect Ratio and Smoothness.mp4
23.75MB
452736 - 126 - Mesh Metric Graph.mp4
28.03MB
452736 - 127 - Section Planes.mp4
29.59MB
452736 - 128 - CFX Mesh Quality Check.mp4
7.68MB
452736 - 129 - Fluent Mesh Quality Check.mp4
14.06MB
452736 - 130 - Improving Quality Virtual Topology.mp4
107.4MB
452736 - 131 - Improving Quality Pinch Tool.mp4
39.17MB
452736 - 132 - Workshop 5a Applications Mixing Tank.mp4
133.12MB
452736 - 133 - Workshop 5b Applications Auto Aero.mp4
200.28MB
452736 - 134 - Workshop 5c Applications Chamber.mp4
105.86MB
452736 - 135 - Workshop 5d Applications Assembly Meshing.mp4
104.97MB
452736 - 136 - Basic Analysis Procedure.mp4
31.48MB
452736 - 137 - The Mechanical Interface.mp4
33.26MB
452736 - 138 - Menus.mp4
28.33MB
452736 - 139 - Toolbars.mp4
109.23MB
452736 - 140 - Graphics Control and Selection.mp4
47.29MB
452736 - 141 - Outline Tree and Details.mp4
61.48MB
452736 - 142 - Tagging and Tree Filtering.mp4
62.66MB
452736 - 143 - Graphics Window.mp4
29.87MB
452736 - 144 - The Mechanical Application Wizard.mp4
37.26MB
452736 - 145 - Scoping Loads and Supports.mp4
88.75MB
452736 - 146 - The Engineering Data application.mp4
185.34MB
452736 - 147 - Assigning Material Properties.mp4
20.9MB
452736 - 148 - Workshop 2-1 Basics.mp4
75.29MB
452736 - 149 - Geometry.mp4
67.89MB
452736 - 150 - Contact.mp4
39.32MB
452736 - 151 - Workshop 3-1 2D Gear and Rack Analysis.mp4
58.58MB
452736 - 152 - Coordinate Systems.mp4
36.27MB
452736 - 153 - Named Selections.mp4
92.84MB
452736 - 154 - Workshop 3-2 Named Selections.mp4
79.02MB
452736 - 155 - Object Generator.mp4
84.74MB
452736 - 156 - Selection Information.mp4
14.47MB
452736 - 157 - Workshop 3-3 Object Generator.mp4
83.7MB
452736 - 158 - Global Meshing Controls.mp4
76.48MB
452736 - 159 - Local Meshing Controls.mp4
158.09MB
452736 - 160 - Meshing Troubleshooting.mp4
23.71MB
452736 - 161 - Virtual Topology.mp4
88.38MB
452736 - 162 - Workshop 4-1 Mesh Control.mp4
135.76MB
452736 - 163 - Submodeling.mp4
66.83MB
452736 - 164 - Basics of Linear Static Analysis.mp4
12.67MB
452736 - 165 - Geometry.mp4
25.31MB
452736 - 166 - Material Properties.mp4
10.31MB
452736 - 167 - Contact.mp4
20.99MB
452736 - 168 - Analysis Settings.mp4
48.6MB
452736 - 169 - Loads.mp4
201.45MB
452736 - 170 - Supports.mp4
83.66MB
452736 - 171 - Nodal Loads and Supports.mp4
60.83MB
452736 - 172 - Load and Support Display.mp4
12.12MB
452736 - 173 - Solving Models.mp4
17.47MB
452736 - 174 - Workshop 5-1 Pump Assembly With Contact.mp4
94.99MB
452736 - 175 - Results and Postprocessing.mp4
125.33MB
452736 - 176 - Workshop 5-2 Using Beam Connections.mp4
70.64MB
452736 - 177 - Contact.mp4
118.89MB
452736 - 178 - Contact Controls.mp4
107.73MB
452736 - 179 - Contact Results.mp4
18.23MB
452736 - 180 - Spot Welds.mp4
11.55MB
452736 - 181 - Mesh Connections.mp4
34.99MB
452736 - 182 - Connections Worksheet.mp4
34.84MB
452736 - 183 - Workshop 6-1 Contact Offset Control.mp4
50.39MB
452736 - 184 - Joint Definitions.mp4
39.94MB
452736 - 185 - Joint Configuration.mp4
47.16MB
452736 - 186 - Joint Stops and Locks.mp4
7.35MB
452736 - 187 - Springs and Beams.mp4
31.99MB
452736 - 188 - Workshop 6-2 Using Joints.mp4
63.69MB
452736 - 189 - Definitions.mp4
23.05MB
452736 - 190 - Remote Points.mp4
37.67MB
452736 - 191 - Behavior Control.mp4
33MB
452736 - 192 - Pinball Control.mp4
34.46MB
452736 - 193 - Remote Point Sharing.mp4
36.87MB
452736 - 194 - Display Options.mp4
56.1MB
452736 - 195 - Workshop 7-1 Remote Boundary Conditions.mp4
45.62MB
452736 - 196 - Constraint Equations.mp4
40.63MB
452736 - 197 - CE Example.mp4
58.05MB
452736 - 198 - Workshop 7-2 Constraint Equations.mp4
42.17MB
452736 - 199 - Multistep Analysis.mp4
13.31MB
452736 - 200 - Multistep Setup.mp4
10.15MB
452736 - 201 - Multistep Controls.mp4
27.95MB
452736 - 202 - Multistep Loads.mp4
33.21MB
452736 - 203 - Multistep Postprocessing.mp4
25.27MB
452736 - 204 - Solution Combinations.mp4
76.15MB
452736 - 205 - Workshop 8-1 Multistep Analysis.mp4
69.37MB
452736 - 206 - Basics of Free Vibration.mp4
22.55MB
452736 - 207 - Geometry.mp4
19.47MB
452736 - 208 - Contact.mp4
22.25MB
452736 - 209 - Solution Setup.mp4
32.63MB
452736 - 210 - Modal Results.mp4
17MB
452736 - 211 - Vibration With Prestress.mp4
46.05MB
452736 - 212 - Workshop 9-1 Free Vibration - Machine Frame.mp4
76.44MB
452736 - 213 - Basics of Steady State Heat Transfer.mp4
16.41MB
452736 - 214 - Geometry.mp4
10MB
452736 - 215 - Material Properties.mp4
3.88MB
452736 - 216 - Thermal Contact.mp4
63.38MB
452736 - 217 - Thermal Boundary Conditions.mp4
124.8MB
452736 - 218 - Solution Options.mp4
19.8MB
452736 - 219 - Results and Postprocessing.mp4
27.97MB
452736 - 220 - Workshop 10-1 Pump Housing.mp4
64.8MB
452736 - 221 - Viewing Results.mp4
33.27MB
452736 - 222 - Legend Controls.mp4
48.97MB
452736 - 223 - Contour Controls.mp4
63.04MB
452736 - 224 - Postprocessing Utilities.mp4
149.6MB
452736 - 225 - Scoping Results.mp4
65.53MB
452736 - 226 - Linearized Stress.mp4
8.56MB
452736 - 227 - Exporting Results.mp4
23.02MB
452736 - 228 - Coordinate Systems.mp4
14.44MB
452736 - 229 - Error Estimation.mp4
47.29MB
452736 - 230 - Convergence.mp4
86.6MB
452736 - 231 - Stress Singularities.mp4
27.59MB
452736 - 232 - Convergence and Scoping.mp4
23.11MB
452736 - 233 - Workshop 11-1 Results Processing.mp4
88.09MB
452736 - 234 - CAD Import.mp4
118.83MB
452736 - 235 - Defining Parameters in Workbench.mp4
31.69MB
452736 - 236 - Using the Parameter Workspace.mp4
140.92MB
452736 - 237 - Updating CAD Parameters.mp4
35.51MB
452736 - 238 - Workshop 12-1 Parameter Management.mp4
52.9MB
452736 - 239 - Introduction and what is CFD.mp4
27.6MB
452736 - 240 - Step-by-step through CFD workflow.mp4
111.68MB
452736 - 241 - Launching CFX.mp4
9.19MB
452736 - 242 - CFX-Pre.mp4
61.54MB
452736 - 243 - CFX Solver Manager.mp4
25.34MB
452736 - 244 - CFD-Post.mp4
25.58MB
452736 - 245 - File Types Used.mp4
42.65MB
452736 - 246 - Workshop 1 Mixing Tee.mp4
157.58MB
452736 - 247 - Domain Basics.mp4
20.71MB
452736 - 248 - Domains Reference Pressure.mp4
17.68MB
452736 - 249 - Domains Setting Buoyancy.mp4
45.17MB
452736 - 250 - Domain Types (Moving Solid).mp4
26.82MB
452736 - 251 - Porous Domain Models.mp4
31.12MB
452736 - 252 - Materials and Multicomponent Flows.mp4
24.06MB
452736 - 253 - Boundary Conditions.mp4
34.71MB
452736 - 254 - Specifying a Well posed BC.mp4
66.26MB
452736 - 255 - Source Terms.mp4
38.02MB
452736 - 256 - Workshop 2 Mixing Tee with Particles.mp4
111.95MB
452736 - 257 - Workshop 3 Mixing Tube.mp4
284.02MB
452736 - 258 - Introduction and Launching.mp4
23.06MB
452736 - 259 - 3D Standalone Viewer.mp4
17.15MB
452736 - 260 - General Workflow.mp4
24.32MB
452736 - 261 - Variables, Tables and Charts.mp4
36.93MB
452736 - 262 - Reports and Case Comparison.mp4
23.69MB
452736 - 263 - Workshop 4 Postprocessing.mp4
302.22MB
452736 - 264 - Introduction and Initialization.mp4
27.61MB
452736 - 265 - Solver Control and Numerics.mp4
43.63MB
452736 - 266 - Timescale Control.mp4
26.56MB
452736 - 267 - Convergence.mp4
20.79MB
452736 - 268 - Other Solver Controls.mp4
13.37MB
452736 - 269 - Output Control.mp4
14.11MB
452736 - 270 - Solver Manager Serial and Parallel.mp4
28.56MB
452736 - 271 - Solver Manager Interactive Control.mp4
18.3MB
452736 - 272 - Output File from the Solver.mp4
57.37MB
452736 - 273 - Workshop 5 Airfoil.mp4
125.18MB
452736 - 274 - Introduction.mp4
31.85MB
452736 - 275 - Domain Interfaces.mp4
103.46MB
452736 - 276 - Mesh Connection Method.mp4
55.99MB
452736 - 277 - Moving Reference Frames.mp4
160.66MB
452736 - 278 - Pitch Change and Intersection.mp4
64.39MB
452736 - 279 - Mesh Deformation.mp4
85.95MB
452736 - 280 - Workshop 6 Axial Fan.mp4
154.74MB
452736 - 281 - Conduction, Convection and Radiation.mp4
58.66MB
452736 - 282 - Heat Transfer Models.mp4
20.65MB
452736 - 283 - Radiation Models.mp4
25.8MB
452736 - 284 - Conduction in Solids.mp4
8.67MB
452736 - 285 - Thermal Boundary Conditions.mp4
17.36MB
452736 - 286 - Conjugate Heat Transfer.mp4
16.29MB
452736 - 287 - Post-Processing Heat Transfer.mp4
24.4MB
452736 - 288 - Tips.mp4
13.98MB
452736 - 289 - Workshop 8 Electronics Cooling.mp4
205.63MB
452736 - 290 - Approaches to Turbulence Modelling.mp4
52.21MB
452736 - 291 - RANS (Reynolds-Averaged Navier Stokes) Models.mp4
25.94MB
452736 - 292 - Models in CFX, including k-e and k-omega.mp4
12.72MB
452736 - 293 - SST (Shear Stress Transport) Model.mp4
22.67MB
452736 - 294 - Turbulence near a Wall.mp4
37.57MB
452736 - 295 - Inlet Boundary Conditions.mp4
19.51MB
452736 - 296 - Introduction and Motivation.mp4
26.3MB
452736 - 297 - Setting up a Transient Flow.mp4
19.18MB
452736 - 298 - Picking an Appropriate Timestep.mp4
26.38MB
452736 - 299 - Boundary Conditions and Initialization.mp4
11.9MB
452736 - 300 - Solver Control.mp4
15.63MB
452736 - 301 - Output Control.mp4
28.88MB
452736 - 302 - Workshop 9 Tank Flush.mp4
135.12MB
452736 - 303 - Overview of Quailty Issues.mp4
15.5MB
452736 - 304 - Roundoff and Iteration Errors.mp4
25.57MB
452736 - 305 - Discretiziation Errors.mp4
15.48MB
452736 - 306 - Model and Systematic Errors.mp4
10.6MB
452736 - 307 - Meshing Best Practice.mp4
16.4MB
452736 - 308 - Mesh Quality.mp4
20.3MB
452736 - 309 - Hex v Tet Meshes.mp4
15.15MB
452736 - 310 - Workshop 10 Vortex Shedding.mp4
131.32MB
452736 - 311 - Introduction.mp4
31.24MB
452736 - 312 - Additional Variables.mp4
62.15MB
452736 - 313 - CEL (CFX Expression Language).mp4
36.27MB
452736 - 314 - CEL Examples.mp4
22.77MB
452736 - 315 - User Functions.mp4
20.85MB
452736 - 316 - Integrated Quantities.mp4
31.51MB
452736 - 317 - CCL (CFX Command Language).mp4
80.26MB
452736 - 318 - Introduction and what is CFD.mp4
26.88MB
452736 - 319 - Preparation and Planning.mp4
18.95MB
452736 - 320 - Geometry and Mesh.mp4
29.63MB
452736 - 321 - Solver Setup and Solution.mp4
29.54MB
452736 - 322 - Results and Evaluation.mp4
24.83MB
452736 - 323 - Workshop 1 Mixing Tee.mp4
151.84MB
452736 - 324 - Introduction.mp4
6.97MB
452736 - 325 - Material Properties, inc Fixed or Variable Density.mp4
37.47MB
452736 - 326 - Operating Pressure.mp4
11.58MB
452736 - 327 - Cell Zones Introduction.mp4
21.51MB
452736 - 328 - Cell Zones Fluid, Porous and Solid.mp4
18.24MB
452736 - 329 - Boundary Conditions Introduction.mp4
39.17MB
452736 - 330 - Inlet BCs Velocity, Pressure and Mass-Flow.mp4
33.97MB
452736 - 331 - Outlet BCs Pressure and Outflow.mp4
24.77MB
452736 - 332 - Wall, Symmetry and Axis Boundaries.mp4
16.25MB
452736 - 333 - Copying BCs.mp4
11.24MB
452736 - 334 - Good Practice when Defining Boundaries.mp4
84.49MB
452736 - 335 - Workshop 2 Discrete Phase Model.mp4
194.11MB
452736 - 336 - Introduction and Overview.mp4
15.9MB
452736 - 337 - Postprocessing Within Fluent.mp4
61.38MB
452736 - 338 - CFD-Post Introduction and Launching.mp4
21.48MB
452736 - 339 - 3D Standalone Viewer.mp4
8.01MB
452736 - 340 - General Workflow.mp4
35.01MB
452736 - 341 - Variables, Tables and Charts.mp4
29.49MB
452736 - 342 - Reports and Case Comparison.mp4
35.7MB
452736 - 343 - Workshop 3 Post-Processing.mp4
229.36MB
452736 - 344 - Overview of Solvers (Pressure and Density Based).mp4
39.83MB
452736 - 345 - Pressure-Based Solver.mp4
67.54MB
452736 - 346 - Pseudo-Transient.mp4
14.17MB
452736 - 347 - Density-Based Solver.mp4
21.02MB
452736 - 348 - Discretization Methods (1st 2nd order).mp4
79.58MB
452736 - 349 - Initialization.mp4
47.9MB
452736 - 350 - Case Check.mp4
4.04MB
452736 - 351 - Convergence Checking.mp4
48.24MB
452736 - 352 - Convergence Troubleshooting and Accuracy.mp4
15.89MB
452736 - 353 - Mesh Adaption.mp4
44.59MB
452736 - 354 - Workshop 4 Airfoil.mp4
198.28MB
452736 - 355 - Background to Turbulent Flow.mp4
63.82MB
452736 - 356 - Mean and Instantaneous Velocities.mp4
23.1MB
452736 - 357 - Overview of Approaches (DNS LES RANS).mp4
29.63MB
452736 - 358 - RANS (Reynolds-Averaged Naview Stokes) Models.mp4
35.1MB
452736 - 359 - Models Available in Fluent.mp4
12.08MB
友情提示
不会用的朋友看这里 把磁力链接复制到离线下载,或者bt下载软件里即可下载文件,或者直接复制迅雷链接到迅雷里下载! 亲,你造吗?将网页分享给您的基友,下载的人越多速度越快哦!
违规内容投诉邮箱:
[email protected]
概述 838888磁力搜索是一个磁力链接搜索引擎,是学术研究的副产品,用于解决资源过度分散的问题 它通过BitTorrent协议加入DHT网络,实时的自动采集数据,仅存储文件的标题、大小、文件列表、文件标识符(磁力链接)等基础信息 838888磁力搜索不下载任何真实资源,无法判断资源的合法性及真实性,使用838888磁力搜索服务的用户需自行鉴别内容的真伪 838888磁力搜索不上传任何资源,不提供Tracker服务,不提供种子文件的下载,这意味着838888磁力搜索 838888磁力搜索是一个完全合法的系统