Pluralsight - Maya Modeling Fundamentals

1. 34 - Modeling the Camera Assembly Base - Modeling the Shock Absorbers with NURBS.mp438.86MB
2. 33 - Modeling the Camera Assembly Base - Creating the Bottom Plate.mp432.16MB
3. 35 - Modeling the Camera Assembly Base - Adding the Shock Caps.mp423.37MB
4. 36 - Modeling the Camera Assembly Base - Modeling the Electronics Component.mp453.82MB
5. 37 - Modeling the Camera Assembly Base - Adding Wires with NURBS.mp439.55MB
6. 32 - Modeling the Camera Assembly Base - Bridging to Create the Base Plate.mp463MB
7. 31 - Detailing the Bottom of the Drone - Building the Torx-type Screws.mp443.45MB
8. 27 - Building the Motors - Extruding Out a Propeller.mp465.79MB
9. 28 - Building the Motors - Grouping the Motor and Propeller.mp433.78MB
10. 29 - Detailing the Bottom of the Drone - Using Booleans to Cut Holes.mp461.57MB
11. 30 - Detailing the Bottom of the Drone - Modeling the Front Label.mp428.86MB
12. 38 - Modeling the Camera - Building the Pivot Base.mp451.12MB
13. 39 - Modeling the Camera - Modeling the First Pivot.mp458.21MB
14. 46 - Materials, Textures, and Rendering - Creating a Basic UV Layout.mp454.29MB
15. 47 - Materials, Textures, and Rendering - Editing Bump Maps.mp455.06MB
16. 48 - Materials, Textures, and Rendering - Creating a Color Map.mp436MB
17. 45 - Materials, Textures, and Rendering - Applying Materials.mp469.03MB
18. 44 - Modeling the Camera - Detailing the Camera Lens.mp467.47MB
19. 40 - Modeling the Camera - Creating a Connector Piece.mp448.34MB
20. 41 - Modeling the Camera - Finishing the Second Pivot.mp442.96MB
21. 42 - Modeling the Camera - Modeling the Camera.mp450.72MB
22. 43 - Modeling the Camera - Adding the Camera Connector.mp457.23MB
23. 26 - Building the Motors - Preparing the Cone for Propellers.mp432.53MB
24. 25 - Building the Motors - Creating the Propeller Base.mp427.99MB
25. 09 - Detailing the Drone Body - Modifying the Topology with Multi-cut.mp457.58MB
26. 08 - Blocking Out the Drone Body - Shaping and Smoothing the Body.mp439.44MB
27. 10 - Detailing the Drone Body - Finishing and Prepping the Base Topology.mp474.63MB
28. 11 - Detailing the Drone Body - Extruding the Drone Base.mp461.26MB
29. 12 - Detailing the Drone Body - Extracting the Battery Pack.mp448.58MB
30. 07 - Blocking Out the Drone Body - Duplicating the Arms.mp491.58MB
31. 06 - Blocking Out the Drone Body - Detailing the Arms with Extrusions.mp464.92MB
32. 02 - Blocking Out the Drone Body - Geometry Primer.mp452.7MB
33. 03 - Blocking Out the Drone Body - Setting Up a Scale Template.mp441.26MB
34. 04 - Blocking Out the Drone Body - Building an Arm with Polygons.mp448.93MB
35. 05 - Blocking Out the Drone Body - Bridging and Shaping the Arms.mp471.61MB
36. 13 - Detailing the Drone Body - Adding the Battery Latches.mp469.46MB
37. 14 - Detailing the Drone Body - Modeling the Seam.mp430.46MB
38. 21 - Modeling the Support Structure - Adding the Wire with NURBS.mp441.12MB
39. 22 - Modeling the Support Structure - Grouping and Duplicating the Support.mp427.86MB
40. 23 - Building the Motors - Creating the Motor Base.mp464.12MB
41. 24 - Building the Motors - Duplicating the Copper Coils.mp443.4MB
42. 20 - Modeling the Support Structure - Mirroring the Support.mp426.92MB
43. 19 - Modeling the Support Structure - Extruding the Pads.mp431.09MB
44. 15 - Detailing the Drone Body - Modeling the Gold Bands.mp483.51MB
45. 16 - Modeling the Support Structure - Creating the Support Base.mp465.82MB
46. 17 - Modeling the Support Structure - Bridging the Legs.mp427.26MB
47. 18 - Modeling the Support Structure - Creating Leg Insets.mp440.38MB
48. 01 - Course Overview - Course Overview.mp43.79MB